Lyon Infrastructure

3 tips to make moving to a new place easy

The word moving is definitely an itch to the brain. The idea of moving to a new place gives you all kinds of emotions, maybe wonderment, excitement, sadness, nervousness and even frustrations at times. Along with that, there is delayed procrastination that leaves you packing until the very last minute. That makes everything hectic and leaves you with no room to a proper goodbye to the place you are leaving.


But the emotion associated with moving rarely changes except for a few organizational enthusiasts. However, whichever category you are from, you should know these  three tips that can help you in moving easily along your specific truck hire. Without further delay, here are those tips.

Moving supplies

First, you will need to jot everything down regarding the moving. When are you going to do it, how much time you have till then and how much packing you can withstand each day. This will male your life much easier and will assist you in buying the right supplies at the right time. Otherwise, at the end, you will be left near the night before your moving day, looking for moving supplies.


Next, when you know what you need for the moving, you need to figure out where to buy all these supplies. Find places that sell cheap but durable boxes along with reliable truck hire melbourne. You do not want your glassware breaking down the middle of the road because you opted for loose boxes. If things do not go according to your budget, you can buy cheap boxes but use old bubble wraps, blankets and plastics to assist your delicate furniture. I would recommend using these old things no matter what price you buy the boxes at. They will keep your furniture safe.


Hire the movers at your earliest

You must get your truck hire for the move at your earliest. You would be surprised at how many people are moving around the country that you would have to reserve your spot for the moving truck. For your satisfaction, try booking as early as possible so your move is not delayed while your boxes remain packed in the old house. Do research before you hire someone because there are a lot of scams that are just looking to rip you off of your money.

Stay organized

Lastly, this could not be of any surprise but you need to stay organized while moving. The truck hire will do its job with the smooth moving if you keep your boxes labelled. This way, he can tell which boxes to handle with care. You can also photograph your things before you move to see that everything you wanted from your old house has been shifted to your new place. You can also donate some of your old items, toys, clothes that you do not need anymore to the ones in need. It will help the communities and the societies working for those in need.

Read More »


One of the ways of integrating photovoltaics into buildings is to incorporate it into facades, that is, onto walls or windows, which usually means – unless particular geometries such as “venetian blinds” or “sawtooth” are adopted – installation of modules vertically , and therefore with reduced access to solar radiation, which is all the more effective in producing energy the more it hits the modules perpendicular to their surface. Therefore, the use on facades is partly justified by aesthetic reasons and partly by the possibility of exploiting large surfaces, which partly compensates for the lower efficiency compared to the roof in energy production. The use of photovoltaics in skylights or for the construction of entire glass roofs (e.g. of gyms, shopping centers, etc.), on the other hand, represents above all an intelligent way of combining an economical (as efficient) use of photovoltaic technology with the possibility of creating structures with a fascinating designnte.

The most suitable photovoltaic technologies, from the point of view of the efficiency / price ratio, for integration into a building depend on numerous factors, starting with the location and orientation of the building. On a facade, for example, the expensive crystalline modules(on a traditional opaque support or embedded in glass) may be preferable to other solutions only if the building in question has a southern orientation (more or less 45 ° ). If the building does not have such an orientation, their use should be limited to the roof. The thin film, made with silicon cells or based on other semiconductor materials – including the innovative “organic cells” – is a technology that allows you to maximize the efficiency / price ratio in many situations: it is ideal for exploiting large surfaces, such as facades and roofs of commercial or industrial buildings, as well as for hot climates, where the performance of crystalline silicon declines by 5% every 10 ° of temperature above 25 ° C.

Read More »


A complete system includes the following components: (1) photovoltaic modules , which can be crystalline or thin film , transparent, semi-transparent or opaque; (2) an inverter , which converts the direct current (DC) supplied by the modules into alternating current, or AC; (3) all support and mounting hardware, wiring, fuses, etc. the classic “networked” type (used to take advantage of state incentives and that immense natural accumulator that is the national electricity grid), but is an isolated system ( stand-alone), there are the following additional components: (4) a battery pack to store the electricity produced; (5) a charge controller , which regulates the energy that enters and leaves the batteries; (6) a possible “backup” generator system – such as eg. a diesel generator – which starts automatically when the main one cannot operate due to the absence of the sun or is unable to meet the energy demand.

Designing a building that integrates a photovoltaic system requires taking into account various factors, including: the use of the building, its location and orientation; the needs and objectives to be achieved in terms of aesthetics, energy, heat, lighting; the peculiarities and indications of the various photovoltaic technologies and related materials, etc. In parallel, other possible measures to improve energy efficiency must be considered

of the building, of which the photovoltaic electricity generation system is only one component. Usually, a photovoltaic system is sized on the basis of objective constraints, such as eg. the space available and the budget. However, in the case of integrated photovoltaics in new buildings, it is not necessary to look at the initial cost of the system but at the “real” one, which takes into account both the savings in construction materials and workforce and the higher value of the building deriving from the electricity produced in the life cycle of the plant itself.

Read More »